Last visit was: It is currently Thu Mar 28, 2024 8:57 am


All times are UTC-05:00




Post new topic Reply to topic  [5 posts ] 
    Author Message
     Post subject:Frame a user for bank fraud - again
    PostPosted:Fri Feb 09, 2018 6:26 pm 
     

    Joined:Wed May 04, 2011 12:00 pm
    Posts:12
    Is this mission "frame a user for bank fraud" possible to do?
    I try to do:
    I was looking for the shortest route possible, i. e. UplinkTestMachine, the victim's PC, InterNIC and the target bank.
    After logging in with firewall disabler and password breaker and waiting almost to the end I delete the log on UplinkTestMachine and change on the victim's PC so that bounce starts there. It seems that everything is ok and these moorons from the bank cannot find a trace in the logs.
    I'm doing something wrong or is the mission still damaged?


    Top
    Offline  
     Post subject:Re: Frame a user for bank fraud - again
    PostPosted:Sun Feb 11, 2018 3:35 pm 
     

    Joined:Wed May 04, 2011 12:00 pm
    Posts:12
    Ok it's work.
    Don't use bounce by victim's PC. It works without his computer. I use very short connect: InterNIC, one random mainframe and target bank. I start firewall_disabler and password_breaker and wait some seconds. Next login on InterNIC and change log "Connection from 127.0.0.1 routed to IP_random_mainframe" to "Connection from IP_victims's PC routed to IP_random_mainframe.
    Go to Uplink ISS and wait some hours in news serwer for 2 informations: from bank about hacking and from Federal Agents about arresting victim.


    Top
    Offline  
     Post subject:Re: Frame a user for bank fraud - again
    PostPosted:Wed Feb 14, 2018 7:29 pm 
     

    Joined:Mon Nov 13, 2017 11:44 am
    Posts:17
    Quote:
    I start firewall_disabler and password_breaker
    Firewall disabler is useless to use on banks as they dont have one so just a waste of ram, and you can just use password breaker by itself on this mission as they'll start a passive trace on that alone.

    Just to make your life easier, dont waste money on any of the disablers and save up for bypassers instead even though they cost more. Save you more time, less risky and save money in the long run


    Top
    Offline  
     Post subject:Re: Frame a user for bank fraud - again
    PostPosted:Tue Feb 20, 2018 4:03 pm 
    User avatar
     

    Joined:Sat Jun 06, 2009 1:21 am
    Posts:581
    Except you're trying to frame someone, so using a bypasser is a bad idea (since they are harder to detect). Disablers are where it's at when framing people.

    _________________
    I'll see you on the dark side of the (ferrous) moon.


    Top
    Offline  
     Post subject:Re: Frame a user for bank fraud - again
    PostPosted:Tue Feb 20, 2018 4:44 pm 
     

    Joined:Mon Nov 13, 2017 11:44 am
    Posts:17
    for this mission dont you only have to run bandwidth monitor and password breaker? (on just the banks i mean) that would be enough to start a passive trace


    Top
    Offline  
    Display posts from previous: Sort by 
    Post new topic Reply to topic

      All times are UTC-05:00


      Who is online

      Users browsing this forum: No registered users and 30 guests


      You cannot post new topics in this forum
      You cannot reply to topics in this forum
      You cannot edit your posts in this forum
      You cannot delete your posts in this forum
      You cannot post attachments in this forum

      Search for:
      Jump to:  
      cron
      Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
      Theme created by Miah with assistance from hyprnova