Yes, it is strange.
Code:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-11-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Jan 29 19:24:39 UTC 2009 (Ubuntu 2.6.27-11.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000047ef0000 (usable)
[ 0.000000] BIOS-e820: 0000000047ef0000 - 0000000047eff000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000047eff000 - 0000000047f00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000047f00000 - 0000000050000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x47ef0 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000
[ 0.000000] RAMDISK: 3781f000 - 37fef7c4
[ 0.000000] ACPI: RSDP 000F7DF0, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 47EF9524, 0034 (r1 PTLTD RSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP 47EFEE31, 0074 (r1 HP Piranha 6040000 ATI F4240)
[ 0.000000] ACPI: DSDT 47EF9558, 58D9 (r1 HP 3085 6040000 MSFT 100000E)
[ 0.000000] ACPI: FACS 47EFFFC0, 0040
[ 0.000000] ACPI: MCFG 47EFEEA5, 003C (r1 ATI Piranha 6040000 LOHR 5F)
[ 0.000000] ACPI: SSDT 47EFEEE1, 00CF (r1 PTLTD POWERNOW 6040000 LTP 1)
[ 0.000000] ACPI: APIC 47EFEFB0, 0050 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: DMI detected: Hewlett-Packard
[ 0.000000] 254MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 38000000
[ 0.000000] low ram: 00000000 - 38000000
[ 0.000000] bootmap 00008000 - 0000f000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00005c29e0] TEXT DATA BSS ==> [0000100000 - 00005c29e0]
[ 0.000000] #4 [003781f000 - 0037fef7c4] RAMDISK ==> [003781f000 - 0037fef7c4]
[ 0.000000] #5 [00005c3000 - 00005c6000] INIT_PG_TABLE ==> [00005c3000 - 00005c6000]
[ 0.000000] #6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00f7e20] 000f7e20
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00038000
[ 0.000000] HighMem 0x00038000 -> 0x00047ef0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00047ef0
[ 0.000000] On node 0 totalpages: 294543
[ 0.000000] free_area_init_node: node 0, pgdat c048c680, node_mem_map c1000000
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 223300 pages, LIFO batch:31
[ 0.000000] HighMem zone: 64690 pages, LIFO batch:15
[ 0.000000] SB4X0 revision 0x10
[ 0.000000] Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 60000000 (gap: 50000000:90000000)
[ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 291953
[ 0.000000] Kernel command line: root=UUID=d2c7ed4e-02f3-4da1-814f-57f2846edb03 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PIT calibration value
[ 0.000000] Detected 1989.782 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 1153436k/1178560k available (2576k kernel code, 24144k reserved, 1165k data, 424k init, 261056k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc04ad000 - 0xc0517000 ( 424 kB)
[ 0.004000] .data : 0xc03840da - 0xc04a7680 (1165 kB)
[ 0.004000] .text : 0xc0100000 - 0xc03840da (2576 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.004015] Calibrating delay loop (skipped), value calculated using timer frequency.. 3979.56 BogoMIPS (lpj=7959128)
[ 0.004038] Security Framework initialized
[ 0.004051] SELinux: Disabled at boot.
[ 0.004083] AppArmor: AppArmor initialized
[ 0.004092] Mount-cache hash table entries: 512
[ 0.004285] Initializing cgroup subsys ns
[ 0.004289] Initializing cgroup subsys cpuacct
[ 0.004292] Initializing cgroup subsys memory
[ 0.004310] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004313] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004330] Checking 'hlt' instruction... OK.
[ 0.020461] SMP alternatives: switching to UP code
[ 0.025681] Freeing SMP alternatives: 11k freed
[ 0.025685] ACPI: Core revision 20080609
[ 0.027814] ACPI: Checking initramfs for custom DSDT
[ 0.368242] ENABLING IO-APIC IRQs
[ 0.368425] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.411762] CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 00
[ 0.412025] Brought up 1 CPUs
[ 0.412025] Total of 1 processors activated (3979.56 BogoMIPS).
[ 0.412025] CPU0 attaching NULL sched-domain.
[ 0.412025] net_namespace: 840 bytes
[ 0.412025] Booting paravirtualized kernel on bare hardware
[ 0.412025] Time: 12:32:30 Date: 02/17/09
[ 0.412025] NET: Registered protocol family 16
[ 0.412025] EISA bus registered
[ 0.412025] ACPI: bus type pci registered
[ 0.412025] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.412025] PCI: MCFG area at e0000000 reserved in E820
[ 0.412025] PCI: Using MMCONFIG for extended config space
[ 0.412025] PCI: Using configuration type 1 for base access
[ 0.412025] ACPI: EC: Look up EC in DSDT
[ 0.412787] ACPI: Interpreter enabled
[ 0.412792] ACPI: (supports S0 S3 S4 S5)
[ 0.412806] ACPI: Using IOAPIC for interrupt routing
[ 0.416608] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.492611] ACPI: EC: GPE = 0x1a, I/O: command/status = 0x66, data = 0x62
[ 0.492613] ACPI: EC: driver started in interrupt mode
[ 0.492658] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.492766] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.492770] pci 0000:00:04.0: PME# disabled
[ 0.492829] PCI: 0000:00:13.0 reg 10 32bit mmio: [b0000000, b0000fff]
[ 0.492919] PCI: 0000:00:13.1 reg 10 32bit mmio: [b0001000, b0001fff]
[ 0.493018] PCI: 0000:00:13.2 reg 10 32bit mmio: [b0002000, b0002fff]
[ 0.493076] pci 0000:00:13.2: supports D1
[ 0.493077] pci 0000:00:13.2: supports D2
[ 0.493080] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.493085] pci 0000:00:13.2: PME# disabled
[ 0.493126] PCI: 0000:00:14.0 reg 10 io port: [8400, 840f]
[ 0.493135] PCI: 0000:00:14.0 reg 14 32bit mmio: [b0003000, b00033ff]
[ 0.493177] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.493221] PCI: 0000:00:14.1 reg 10 io port: [1f0, 1f7]
[ 0.493229] PCI: 0000:00:14.1 reg 14 io port: [3f4, 3f7]
[ 0.493238] PCI: 0000:00:14.1 reg 18 io port: [170, 177]
[ 0.493246] PCI: 0000:00:14.1 reg 1c io port: [374, 377]
[ 0.493254] PCI: 0000:00:14.1 reg 20 io port: [8410, 841f]
[ 0.493416] PCI: 0000:00:14.5 reg 10 32bit mmio: [b0003400, b00034ff]
[ 0.493503] PCI: 0000:00:14.6 reg 10 32bit mmio: [b0003800, b00038ff]
[ 0.493632] PCI: 0000:01:05.0 reg 10 32bit mmio: [c0000000, cfffffff]
[ 0.493636] PCI: 0000:01:05.0 reg 14 io port: [9000, 90ff]
[ 0.493640] PCI: 0000:01:05.0 reg 18 32bit mmio: [b0100000, b010ffff]
[ 0.493648] PCI: 0000:01:05.0 reg 30 32bit mmio: [0, 1ffff]
[ 0.493654] pci 0000:01:05.0: supports D1
[ 0.493656] pci 0000:01:05.0: supports D2
[ 0.493669] PCI: bridge 0000:00:01.0 io port: [9000, 9fff]
[ 0.493672] PCI: bridge 0000:00:01.0 32bit mmio: [b0100000, b01fffff]
[ 0.493676] PCI: bridge 0000:00:01.0 64bit mmio pref: [c0000000, cfffffff]
[ 0.496081] PCI: bridge 0000:00:04.0 io port: [0, fff]
[ 0.496084] PCI: bridge 0000:00:04.0 32bit mmio: [0, fffff]
[ 0.496137] PCI: 0000:03:00.0 reg 10 32bit mmio: [b0208000, b02087ff]
[ 0.496147] PCI: 0000:03:00.0 reg 14 32bit mmio: [b0200000, b0203fff]
[ 0.496210] pci 0000:03:00.0: supports D1
[ 0.496211] pci 0000:03:00.0: supports D2
[ 0.496214] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.496220] pci 0000:03:00.0: PME# disabled
[ 0.496248] PCI: 0000:03:02.0 reg 10 32bit mmio: [b0204000, b0205fff]
[ 0.496348] PCI: 0000:03:04.0 reg 10 32bit mmio: [b0209000, b0209fff]
[ 0.496372] pci 0000:03:04.0: supports D1
[ 0.496373] pci 0000:03:04.0: supports D2
[ 0.496375] pci 0000:03:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.496381] pci 0000:03:04.0: PME# disabled
[ 0.496430] PCI: 0000:03:04.3 reg 10 32bit mmio: [b0206000, b0207fff]
[ 0.496498] pci 0000:03:04.3: supports D1
[ 0.496499] pci 0000:03:04.3: supports D2
[ 0.496501] pci 0000:03:04.3: PME# supported from D0 D1 D2 D3hot
[ 0.496507] pci 0000:03:04.3: PME# disabled
[ 0.496552] PCI: 0000:03:04.4 reg 10 32bit mmio: [b020a000, b020a0ff]
[ 0.496562] PCI: 0000:03:04.4 reg 14 32bit mmio: [b0208c00, b0208cff]
[ 0.496573] PCI: 0000:03:04.4 reg 18 32bit mmio: [b0208800, b02088ff]
[ 0.496625] pci 0000:03:04.4: supports D1
[ 0.496627] pci 0000:03:04.4: supports D2
[ 0.496629] pci 0000:03:04.4: PME# supported from D0 D1 D2 D3hot
[ 0.496635] pci 0000:03:04.4: PME# disabled
[ 0.496687] PCI: 0000:03:06.0 reg 10 io port: [a000, a0ff]
[ 0.496697] PCI: 0000:03:06.0 reg 14 32bit mmio: [b020a400, b020a4ff]
[ 0.496757] pci 0000:03:06.0: supports D1
[ 0.496759] pci 0000:03:06.0: supports D2
[ 0.496761] pci 0000:03:06.0: PME# supported from D1 D2 D3hot D3cold
[ 0.496767] pci 0000:03:06.0: PME# disabled
[ 0.496817] pci 0000:00:14.4: transparent bridge
[ 0.496826] PCI: bridge 0000:00:14.4 io port: [a000, afff]
[ 0.496831] PCI: bridge 0000:00:14.4 32bit mmio: [b0200000, b02fffff]
[ 0.496870] bus 00 -> node 0
[ 0.496877] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.497050] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 0.497182] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.497367] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.501280] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 0.501405] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 0.501528] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 0.501650] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 0.501772] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 0.501897] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 0.502019] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 0.502141] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 0.502299] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.502333] pnp: PnP ACPI init
[ 0.502340] ACPI: bus type pnp registered
[ 0.504014] pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.504018] pnp 00:08: io resource (0x72-0x73) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.504022] pnp 00:08: io resource (0xb0-0xb1) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.504035] pnp 00:08: io resource (0x92-0x92) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.504039] pnp 00:08: io resource (0x220-0x22f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.504043] pnp 00:08: io resource (0x40b-0x40b) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.504046] pnp 00:08: io resource (0x4d0-0x4d1) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.504050] pnp 00:08: io resource (0x4d6-0x4d6) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.504053] pnp 00:08: io resource (0x530-0x537) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.504057] pnp 00:08: io resource (0x870-0x87f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.504061] pnp 00:08: io resource (0xc00-0xc01) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.504064] pnp 00:08: io resource (0xc14-0xc14) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.504068] pnp 00:08: io resource (0xc50-0xc52) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.504071] pnp 00:08: io resource (0xc6c-0xc6c) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.504075] pnp 00:08: io resource (0xc6f-0xc6f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.504079] pnp 00:08: io resource (0xcd4-0xcd5) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.504082] pnp 00:08: io resource (0xcd6-0xcd7) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.504086] pnp 00:08: io resource (0xcd8-0xcdf) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.504090] pnp 00:08: io resource (0xf40-0xf47) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.504093] pnp 00:08: io resource (0x280-0x293) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.504302] pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
[ 0.504306] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
[ 0.504319] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6 (0x0-0x1ffff), disabling
[ 0.532106] pnp: PnP ACPI: found 10 devices
[ 0.532108] ACPI: ACPI bus type pnp unregistered
[ 0.532112] PnPBIOS: Disabled by ACPI PNP
[ 0.532435] PCI: Using ACPI for IRQ routing
[ 0.532442] pci 0000:00:04.0: BAR 7: can't allocate resource
[ 0.532444] pci 0000:00:04.0: BAR 8: can't allocate resource
[ 0.532577] NET: Registered protocol family 8
[ 0.532577] NET: Registered protocol family 20
[ 0.532577] NetLabel: Initializing
[ 0.532577] NetLabel: domain hash size = 128
[ 0.532577] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.532577] NetLabel: unlabeled traffic allowed by default
[ 0.532577] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.532577] actual entries 65620
[ 0.532628] AppArmor: AppArmor Filesystem Enabled
[ 0.532656] ACPI: RTC can wake from S4
[ 0.532661] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.532661] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.532661] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.532661] system 00:08: ioport range 0x1080-0x1080 has been reserved
[ 0.532661] system 00:08: ioport range 0x8000-0x805f has been reserved
[ 0.532661] system 00:09: iomem range 0xfff80000-0xffffffff could not be reserved
[ 0.532661] system 00:09: iomem range 0xe0000000-0xe03fffff could not be reserved
[ 0.569400] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.569403] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 0.569407] pci 0000:00:01.0: MEM window: 0xb0100000-0xb01fffff
[ 0.569411] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 0.569415] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
[ 0.569417] pci 0000:00:04.0: IO window: disabled
[ 0.569420] pci 0000:00:04.0: MEM window: disabled
[ 0.569423] pci 0000:00:04.0: PREFETCH window: disabled
[ 0.569429] pci 0000:03:04.0: CardBus bridge, secondary bus 0000:04
[ 0.569432] pci 0000:03:04.0: IO window: 0x00a400-0x00a4ff
[ 0.569438] pci 0000:03:04.0: IO window: 0x00a800-0x00a8ff
[ 0.569444] pci 0000:03:04.0: PREFETCH window: 0x60000000-0x63ffffff
[ 0.569450] pci 0000:03:04.0: MEM window: 0x64000000-0x67ffffff
[ 0.569456] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
[ 0.569460] pci 0000:00:14.4: IO window: 0xa000-0xafff
[ 0.569467] pci 0000:00:14.4: MEM window: 0xb0200000-0xb02fffff
[ 0.569472] pci 0000:00:14.4: PREFETCH window: 0x00000060000000-0x00000063ffffff
[ 0.569489] pci 0000:00:04.0: setting latency timer to 64
[ 0.569510] pci 0000:03:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.569518] bus: 00 index 0 io port: [0, ffff]
[ 0.569520] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.569522] bus: 01 index 0 io port: [9000, 9fff]
[ 0.569525] bus: 01 index 1 mmio: [b0100000, b01fffff]
[ 0.569527] bus: 01 index 2 mmio: [c0000000, cfffffff]
[ 0.569529] bus: 01 index 3 mmio: [0, 0]
[ 0.569532] bus: 02 index 0 mmio: [0, fff]
[ 0.569534] bus: 02 index 1 mmio: [0, fffff]
[ 0.569536] bus: 02 index 2 mmio: [0, 0]
[ 0.569537] bus: 02 index 3 mmio: [0, 0]
[ 0.569540] bus: 03 index 0 io port: [a000, afff]
[ 0.569542] bus: 03 index 1 mmio: [b0200000, b02fffff]
[ 0.569544] bus: 03 index 2 mmio: [60000000, 63ffffff]
[ 0.569546] bus: 03 index 3 io port: [0, ffff]
[ 0.569549] bus: 03 index 4 mmio: [0, ffffffff]
[ 0.569551] bus: 04 index 0 io port: [a400, a4ff]
[ 0.569553] bus: 04 index 1 io port: [a800, a8ff]
[ 0.569555] bus: 04 index 2 mmio: [60000000, 63ffffff]
[ 0.569558] bus: 04 index 3 mmio: [64000000, 67ffffff]
[ 0.569571] NET: Registered protocol family 2
[ 0.569691] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.570062] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.571302] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.571966] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.571969] TCP reno registered
[ 0.572106] NET: Registered protocol family 1
[ 0.572236] checking if image is initramfs... it is
[ 1.072088] Switched to high resolution mode on CPU 0
[ 1.282022] Freeing initrd memory: 8001k freed
[ 1.282770] audit: initializing netlink socket (disabled)
[ 1.282788] type=2000 audit(1234873949.280:1): initialized
[ 1.288854] highmem bounce pool size: 64 pages
[ 1.288861] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.290908] VFS: Disk quotas dquot_6.5.1
[ 1.290987] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.291095] msgmni has been set to 1759
[ 1.291215] io scheduler noop registered
[ 1.291218] io scheduler anticipatory registered
[ 1.291220] io scheduler deadline registered
[ 1.291231] io scheduler cfq registered (default)
[ 1.291243] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 1.291297] pci 0000:01:05.0: Boot video device
[ 1.291407] pcieport-driver 0000:00:04.0: setting latency timer to 64
[ 1.291428] pcieport-driver 0000:00:04.0: found MSI capability
[ 1.291432] pci_express 0000:00:04.0:pcie00: allocate port service
[ 1.291475] pci_express 0000:00:04.0:pcie01: allocate port service
[ 1.337191] aer 0000:00:04.0:pcie01: AER service couldn't init device: no _OSC support
[ 1.337362] isapnp: Scanning for PnP cards...
[ 1.691393] isapnp: No Plug & Play device found
[ 1.725758] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.726350] serial 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.726360] serial 0000:00:14.6: PCI INT B disabled
[ 1.727845] brd: module loaded
[ 1.727919] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.728053] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 1.736993] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.736999] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.737346] mice: PS/2 mouse device common for all mice
[ 1.737474] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.737501] rtc0: alarms up to one month
[ 1.737608] EISA: Probing bus 0 at eisa.0
[ 1.737617] Cannot allocate resource for EISA slot 1
[ 1.737644] Cannot allocate resource for EISA slot 8
[ 1.737646] EISA: Detected 0 cards.
[ 1.737650] cpuidle: using governor ladder
[ 1.737652] cpuidle: using governor menu
[ 1.738165] TCP cubic registered
[ 1.738195] Using IPI No-Shortcut mode
[ 1.738375] registered taskstats version 1
[ 1.738501] Magic number: 13:2:532
[ 1.738507] bdi 1:10: hash matches
[ 1.738716] rtc_cmos 00:04: setting system clock to 2009-02-17 12:32:31 UTC (1234873951)
[ 1.738720] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.738722] EDD information not available.
[ 1.739126] Freeing unused kernel memory: 424k freed
[ 1.739186] Write protecting the kernel text: 2580k
[ 1.739222] Write protecting the kernel read-only data: 940k
[ 1.741994] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.976034] fuse init (API version 7.9)
[ 2.107015] processor ACPI0007:00: registered as cooling_device0
[ 2.107020] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.115571] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.125460] ACPI: Thermal Zone [THRM] (28 C)
[ 2.683620] usbcore: registered new interface driver usbfs
[ 2.683647] usbcore: registered new interface driver hub
[ 2.683678] usbcore: registered new device driver usb
[ 2.692133] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.692172] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.692188] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.692242] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 2.692272] ohci_hcd 0000:00:13.0: irq 19, io mem 0xb0000000
[ 2.730656] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 2.752232] usb usb1: configuration #1 chosen from 1 choice
[ 2.752263] hub 1-0:1.0: USB hub found
[ 2.752278] hub 1-0:1.0: 4 ports detected
[ 2.756169] No dock devices found.
[ 2.812454] SCSI subsystem initialized
[ 2.856343] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.856363] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 2.856387] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 2.856410] ohci_hcd 0000:00:13.1: irq 19, io mem 0xb0001000
[ 2.900958] libata version 3.00 loaded.
[ 2.916198] usb usb2: configuration #1 chosen from 1 choice
[ 2.916232] hub 2-0:1.0: USB hub found
[ 2.916247] hub 2-0:1.0: 4 ports detected
[ 2.950791] 8139too Fast Ethernet driver 0.9.28
[ 3.020352] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3.020373] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 3.020398] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 3.020457] ehci_hcd 0000:00:13.2: irq 19, io mem 0xb0002000
[ 3.032033] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.032219] usb usb3: configuration #1 chosen from 1 choice
[ 3.032248] hub 3-0:1.0: USB hub found
[ 3.032260] hub 3-0:1.0: 8 ports detected
[ 3.136341] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.136395] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 3.136488] scsi0 : pata_atiixp
[ 3.136572] scsi1 : pata_atiixp
[ 3.137909] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8410 irq 14
[ 3.137912] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8418 irq 15
[ 3.300683] ata1.00: ATA-6: ST9808210A, 3.02, max UDMA/100
[ 3.300688] ata1.00: 156301488 sectors, multi 16: LBA48
[ 3.316546] ata1.00: configured for UDMA/100
[ 3.496565] ata2.00: ATAPI: _NEC DVD+/-RW ND-6500A, 2.81, max MWDMA2
[ 3.544528] ata2.00: configured for MWDMA2
[ 3.544651] scsi 0:0:0:0: Direct-Access ATA ST9808210A 3.02 PQ: 0 ANSI: 5
[ 3.580071] scsi 1:0:0:0: CD-ROM _NEC DVD+-RW ND-6500A 2.81 PQ: 0 ANSI: 5
[ 3.580937] b43-pci-bridge 0000:03:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 3.584407] ssb: Sonics Silicon Backplane found on PCI device 0000:03:02.0
[ 3.584850] ohci1394 0000:03:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.634607] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[b0208000-b02087ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 3.640119] 8139too 0000:03:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.641338] eth0: RealTek RTL8139 at 0xa000, 00:0f:b0:4c:ce:1a, IRQ 22
[ 3.641340] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 3.644734] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 3.701640] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.701680] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.726789] Driver 'sd' needs updating - please use bus_type methods
[ 3.726909] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 3.726927] sd 0:0:0:0: [sda] Write Protect is off
[ 3.726930] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.726953] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.727014] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 3.727027] sd 0:0:0:0: [sda] Write Protect is off
[ 3.727030] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.727050] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.727054] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 3.750765] sda1 sda2 sda3
[ 3.768826] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.891475] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 3.891482] Uniform CD-ROM driver Revision: 3.20
[ 3.891589] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.220688] PM: Starting manual resume from disk
[ 4.220692] PM: Resume from partition 8:2
[ 4.220694] PM: Checking hibernation image.
[ 4.220906] PM: Resume from disk failed.
[ 4.267776] kjournald starting. Commit interval 5 seconds
[ 4.267794] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.912132] ieee1394: Host added: ID:BUS[0-00:1023] GUID[533f020012034064]
[ 11.177351] udevd version 124 started
[ 11.632181] Linux agpgart interface v0.103
[ 11.721240] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 11.760761] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.976172] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8400, revision 0
[ 12.060166] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 12.076029] ACPI: Power Button (FF) [PWRF]
[ 12.076166] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 12.076258] ACPI: Lid Switch [LID]
[ 12.076322] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 12.092026] ACPI: Power Button (CM) [PWRB]
[ 12.138059] ACPI: WMI: Mapper loaded
[ 12.475414] ACPI: AC Adapter [ACAD] (on-line)
[ 13.120157] ACPI: Battery Slot [BAT1] (battery present)
[ 13.152671] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:12/device:13/input/input5
[ 13.164056] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 13.616319] Yenta: CardBus bridge found at 0000:03:04.0 [103c:3085]
[ 13.616344] Yenta: Enabling burst memory read transactions
[ 13.616351] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 13.616353] Yenta: Routing CardBus interrupts to ISA
[ 13.616360] Yenta TI: socket 0000:03:04.0, mfunc 0x00aa1b22, devctl 0x64
[ 13.848880] Yenta: ISA IRQ mask 0x0ef8, PCI irq 20
[ 13.848887] Socket status: 30000006
[ 13.848890] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07
[ 13.848897] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[ 13.848901] cs: IO port probe 0xa000-0xafff: clean.
[ 13.849058] pcmcia: parent PCI bridge Memory window: 0xb0200000 - 0xb02fffff
[ 13.849077] pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x63ffffff
[ 13.868348] tifm_7xx1 0000:03:04.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 14.012146] sdhci: Secure Digital Host Controller Interface driver
[ 14.012150] sdhci: Copyright(c) Pierre Ossman
[ 14.040169] sdhci-pci 0000:03:04.4: SDHCI controller found [104c:8034] (rev 0)
[ 14.040195] sdhci-pci 0000:03:04.4: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 14.040290] mmc0: SDHCI controller on PCI [0000:03:04.4] using PIO
[ 14.042356] mmc1: SDHCI controller on PCI [0000:03:04.4] using PIO
[ 14.042403] mmc2: SDHCI controller on PCI [0000:03:04.4] using PIO
[ 14.459236] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 14.804094] b43-phy0: Broadcom 4306 WLAN found
[ 14.859055] phy0: Selected rate control algorithm 'pid'
[ 14.906402] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 14.968818] ATI IXP MC97 controller 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 14.969242] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ]
[ 15.049253] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x23a0b1, caps: 0xa04713/0x200000
[ 15.078988] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 15.080106] MC'97 0 converters and GPIO not ready (0x1)
[ 16.424350] cs: IO port probe 0x100-0x3af: clean.
[ 16.426705] cs: IO port probe 0x3e0-0x4ff: excluding 0x408-0x40f 0x4d0-0x4d7
[ 16.427675] cs: IO port probe 0x820-0x8ff: excluding 0x878-0x87f
[ 16.428502] cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
[ 16.429396] cs: IO port probe 0xa00-0xaff: clean.
[ 17.181142] lp: driver loaded but no devices found
[ 17.434872] Adding 1751076k swap on /dev/sda2. Priority:-1 extents:1 across:1751076k
[ 17.981128] EXT3 FS on sda1, internal journal
[ 18.785551] kjournald starting. Commit interval 5 seconds
[ 18.785776] EXT3 FS on sda3, internal journal
[ 18.785782] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.048453] type=1505 audit(1234873969.020:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=3967
[ 19.275146] type=1505 audit(1234873969.244:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=3972
[ 19.275471] type=1505 audit(1234873969.244:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=3972
[ 19.340580] type=1505 audit(1234873969.312:5): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=3976
[ 19.495867] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 20.478270] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00)
[ 20.478312] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x2
[ 20.478315] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x6
[ 20.478318] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x10
[ 21.211924] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 24.498366] apm: BIOS not found.
[ 24.772655] ppdev: user-space parallel port driver
[ 25.736956] Marking TSC unstable due to cpufreq changes
[ 26.068031] Clocksource tsc unstable (delta = -167357514 ns)
[ 29.634447] Bluetooth: Core ver 2.13
[ 29.637352] NET: Registered protocol family 31
[ 29.637361] Bluetooth: HCI device and connection manager initialized
[ 29.637368] Bluetooth: HCI socket layer initialized
[ 29.683165] Bluetooth: L2CAP ver 2.11
[ 29.683174] Bluetooth: L2CAP socket layer initialized
[ 29.723496] Bluetooth: SCO (Voice Link) ver 0.6
[ 29.723504] Bluetooth: SCO socket layer initialized
[ 29.759718] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 29.759728] Bluetooth: BNEP filters: protocol multicast
[ 29.838004] Bridge firewalling registered
[ 29.857184] Bluetooth: RFCOMM socket layer initialized
[ 29.857786] Bluetooth: RFCOMM TTY layer initialized
[ 29.857795] Bluetooth: RFCOMM ver 1.10
[ 31.956673] pci 0000:01:05.0: power state changed by ACPI to D0
[ 31.956695] pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 32.295381] [drm] Initialized drm 1.1.0 20060810
[ 32.307552] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 32.755358] [drm] Setting GART location based on new memory map
[ 32.758135] [drm] Loading R300 Microcode
[ 32.758171] [drm] Num pipes: 3
[ 32.758180] [drm] writeback test succeeded in 1 usecs
[ 33.429880] NET: Registered protocol family 10
[ 33.434945] lo: Disabled Privacy Extensions
[ 33.988783] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 34.180393] input: b43-phy0 as /devices/virtual/input/input8
[ 34.256102] firmware: requesting b43/ucode5.fw
[ 34.550023] firmware: requesting b43/pcm5.fw
[ 34.822898] firmware: requesting b43/b0g0initvals5.fw
[ 34.851861] firmware: requesting b43/b0g0bsinitvals5.fw
[ 34.980051] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 35.139984] Registered led device: b43-phy0::tx
[ 35.141151] Registered led device: b43-phy0::rx
[ 35.142205] Registered led device: b43-phy0::radio
[ 35.164501] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 35.321033] NET: Registered protocol family 17
[ 44.308024] eth0: no IPv6 routers present