Ferrous Moon
http://www.ferrousmoon.com:80/forums/

Frame a user for bank fraud - again
http://www.ferrousmoon.com:80/forums/viewtopic.php?f=52&t=3100
Page 1 of 1

Author:  123tomek [Fri Feb 09, 2018 6:26 pm ]
Post subject:  Frame a user for bank fraud - again

Is this mission "frame a user for bank fraud" possible to do?
I try to do:
I was looking for the shortest route possible, i. e. UplinkTestMachine, the victim's PC, InterNIC and the target bank.
After logging in with firewall disabler and password breaker and waiting almost to the end I delete the log on UplinkTestMachine and change on the victim's PC so that bounce starts there. It seems that everything is ok and these moorons from the bank cannot find a trace in the logs.
I'm doing something wrong or is the mission still damaged?

Author:  123tomek [Sun Feb 11, 2018 3:35 pm ]
Post subject:  Re: Frame a user for bank fraud - again

Ok it's work.
Don't use bounce by victim's PC. It works without his computer. I use very short connect: InterNIC, one random mainframe and target bank. I start firewall_disabler and password_breaker and wait some seconds. Next login on InterNIC and change log "Connection from 127.0.0.1 routed to IP_random_mainframe" to "Connection from IP_victims's PC routed to IP_random_mainframe.
Go to Uplink ISS and wait some hours in news serwer for 2 informations: from bank about hacking and from Federal Agents about arresting victim.

Author:  Arrow [Wed Feb 14, 2018 7:29 pm ]
Post subject:  Re: Frame a user for bank fraud - again

Quote:
I start firewall_disabler and password_breaker
Firewall disabler is useless to use on banks as they dont have one so just a waste of ram, and you can just use password breaker by itself on this mission as they'll start a passive trace on that alone.

Just to make your life easier, dont waste money on any of the disablers and save up for bypassers instead even though they cost more. Save you more time, less risky and save money in the long run

Author:  sentinel [Tue Feb 20, 2018 4:03 pm ]
Post subject:  Re: Frame a user for bank fraud - again

Except you're trying to frame someone, so using a bypasser is a bad idea (since they are harder to detect). Disablers are where it's at when framing people.

Author:  Arrow [Tue Feb 20, 2018 4:44 pm ]
Post subject:  Re: Frame a user for bank fraud - again

for this mission dont you only have to run bandwidth monitor and password breaker? (on just the banks i mean) that would be enough to start a passive trace

Page 1 of 1 All times are UTC-05:00
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/