Ferrous Moon
http://www.ferrousmoon.com:80/forums/

How do I set a different resolution correctly in Onlink?
http://www.ferrousmoon.com:80/forums/viewtopic.php?f=52&t=2075		 Page 1 of 1
Author:  Axmann [Wed Sep 15, 2010 7:15 am ]
Post subject:  How do I set a different resolution correctly in Onlink?
Well, when I set the resolution myself at the options screen (1152x864, windowed) the interface gets screwed up and the buttons are all in different places but invisible, etc. but when I click the "bailout switch" it sets the resolution to 800x600 windowed, and displays everything perfectly.

Basically, I want to know how I can change the resolution AS it is loading up, that way it will display correctly. How would I do this?

EDIT: Sorry, Just saw this is in the wrong section. Someone move to Onlink section please? :D
Author:  Miah [Wed Sep 15, 2010 3:13 pm ]
Post subject:  Re: How do I set a different resolution correctly in Onlink?
Quote:
EDIT:Sorry, Just saw this is in the wrong section. Someone move to Onlink section please? :D
k.
Quote:
Well, when I set the resolution myself at the options screen (1152x864, windowed) the interface gets screwed up and the buttons are all in different places but invisible, etc. but when I click the "bailout switch" it sets the resolution to 800x600 windowed, and displays everything perfectly.

Basically, I want to know how I can change the resolution AS it is loading up, that way it will display correctly. How would I do this?
Windowed:
Onlink.exe -graphics_fullscreen !graphics_windowedscreenwidth <width> !graphics_windowedscreenheight <height>

Fullscreen:
Onlink.exe +graphics_fullscreen !graphics_fullscreenwidth <width> !graphics_fullscreenheight <height>

If you set the values to zero, Onlink will try to use your native desktop resolution.

...

I think. I haven't actually used these command line options in ages.
Author:  Tycho [Sat Sep 18, 2010 3:53 pm ]
Post subject:  Re: How do I set a different resolution correctly in Onlink?
Good god, it looks like a clown vomited all kinds of colors over the original post! What happened?!
Author:  FinalWarrior [Sat Sep 18, 2010 8:30 pm ]
Post subject:  Re: How do I set a different resolution correctly in Onlink?
Meh, only two colors. Not that bad. I could show you much, much worse...

(Plus, I like aqua.)

-- Griffinhart
Author:  Tycho [Sat Sep 18, 2010 9:51 pm ]
Post subject:  Re: How do I set a different resolution correctly in Onlink?
Two? I see three.
Author:  FinalWarrior [Sun Sep 19, 2010 6:33 am ]
Post subject:  Re: How do I set a different resolution correctly in Onlink?
Huh, I missed the color of "EDIT:". (I tend to glaze over things like "EDIT:" though...)

Still not as bad as some of the posts I've seen on... other forums.

-- Griffinhart
Author:  Tycho [Sun Sep 19, 2010 12:59 pm ]
Post subject:  Re: How do I set a different resolution correctly in Onlink?
You mean, like this?
Author:  FinalWarrior [Sun Sep 19, 2010 9:03 pm ]
Post subject:  Re: How do I set a different resolution correctly in Onlink?
One: that's a website, not a forum post.

Two: still not the worst that I've seen, due to a lack of Comic Sans and/or Papyrus.

-- Griffinhart
Author:  Tycho [Sun Sep 19, 2010 11:00 pm ]
Post subject:  Re: How do I set a different resolution correctly in Onlink?
Yes, I know it's a goddamn website. I was using it as an example of terrifying colours.

ಠ_ಠ
Author:  Vaius [Mon Sep 20, 2010 12:26 am ]
Post subject:  Re: How do I set a different resolution correctly in Onlink?
OH GOD MY EYES! THEY MELTED!

Oh, good, they came back.

*looks back at screen*

OH GOD THE COLORS *vomits*

Now to be serious:

There's a reason there is a default forum text color, axmann.

It's to keep one's eyes from bleeding. Luckily, you didn't abuse the colors.

Unlike that one guy's (I think it was ogro, might've been another name) nonfunctional gateway/lan.
Author:  Rickton [Mon Sep 20, 2010 3:38 pm ]
Post subject:  Re: How do I set a different resolution correctly in Onlink?
Actually I think Tycho's post looks pretty awesome and I wish the default colors were like that.
Author:  Vaius [Mon Sep 20, 2010 4:38 pm ]
Post subject:  Re: How do I set a different resolution correctly in Onlink?
Not against the relatively extremely dark background. When everything else is dark grey and shades of red, it just doesn't look right.

Anyways, it's not as bad as I made it out to be, but it still makes my eyes hurt, for some reason or another.
Author:  FinalWarrior [Mon Sep 20, 2010 9:15 pm ]
Post subject:  Re: How do I set a different resolution correctly in Onlink?
Quote:
Yes, I know it's a goddamn website. I was using it as an example of terrifying colours.

ಠ_ಠ
Still not Comic Sans.

-- Griffinhart
Author:  Tycho [Mon Sep 20, 2010 11:35 pm ]
Post subject:  Re: How do I set a different resolution correctly in Onlink?
I couldn't find a font option. Oh well.
Author:  sentinel [Sun Sep 26, 2010 12:50 am ]
Post subject:  Re: How do I set a different resolution correctly in Onlink?
Oh look,colours! S2

(I would imput a real heart, but im accessing the site from a PSP..)
Page 1 of 1 All times are UTC-05:00
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/