Ferrous Moon
http://www.ferrousmoon.com:80/forums/

Unable to run programs...+ a few other things
http://www.ferrousmoon.com:80/forums/viewtopic.php?f=52&t=1797		 Page 2 of 2
Author:  hexagon [Tue Jun 02, 2009 5:50 pm ]
Post subject:  Re: Unable to run programs...+ a few other things
Quote:
And yes, I think I've finally solved the VSEC and know exactly how to completely bypass the ACS.
How do you bypass the ACS ? Shed some light on us :)
Author:  Switch [Tue Jun 02, 2009 5:54 pm ]
Post subject:  Re: Unable to run programs...+ a few other things
Quote:
Quote:
Protip: Crack the VSEC, and you can freely dump 100gq's of whatever you want in there. Otherwise you're out of luck :p

And yes, I think I've finally solved the VSEC and know exactly how to completely bypass the ACS.
To get to that point, one would have to figure out how to get past the "hook not found" message on the Main and Console boxes under PCForce. Not quite got that yet.
I've not got into the ACS servers yet, but in other PCForce servers (Such as lifters), if it says 'Hook Not Found' for Write and Root, that leaves Login and Admin. I assume this means that literally there's only an admin account, as when there is write access hook, logging in still allows admin access if the hash is cracked.

Some servers just don't have non-admin sections or consoles I guess.
Author:  Hawk_v3 [Wed Jun 03, 2009 4:40 am ]
Post subject:  Re: Unable to run programs...+ a few other things
Yeah, but the ACS has a logs and console buttons, but they're greyed out when just using the system login. It has admin/root functions but you can't get at them through an admin login or the Pc tools...
Author:  Switch [Wed Jun 03, 2009 6:16 am ]
Post subject:  Re: Unable to run programs...+ a few other things
Quote:
Yeah, but the ACS has a logs and console buttons, but they're greyed out when just using the system login. It has admin/root functions but you can't get at them through an admin login or the Pc tools...
I've just updated my Onlink, and I can still get at them fine. This is the exact process down to a click:

Connect via bounces to ACS (I'm using Ferrous Moon ACS)
Open Connection Analysis HUD and bypass monitor, then bypass all other security systems
Open PC Force HUD
Use md2crack on the read access
Use md4crack on the write access
Click next on the PC HUD panel to take you to the inject screen
Click inject on read
Click access on read
Click and break voice ID
Click and break VDPIN
Click and break Cypher
Click and use password breaker on the password screen, this will leave it just saying admin
Click PC Force HUD, click next onto the inject screen and click access again on read, the screen will show that all logins are passed
Go back to hash screen on PC HUD
Use md5crack on the admin hash
Click next, click inject on admin and then click access on admin
Click console in main screen and try and kill the VSEC :/
Author:  Hawk_v3 [Wed Jun 03, 2009 6:18 am ]
Post subject:  Re: Unable to run programs...+ a few other things
...I'll try that, but it sounds like a bug.
Author:  hexagon [Wed Jun 03, 2009 6:36 am ]
Post subject:  Re: Unable to run programs...+ a few other things
Quote:
Click and use password breaker on the password screen, this will leave it just saying admin
Click PC Force HUD, click next onto the inject screen and click access again on read, the screen will show that all logins are passed
It did the same in the previous release (r28), maybe it is a bug ... or maybe not :twisted:
Author:  Hawk_v3 [Wed Jun 03, 2009 6:37 am ]
Post subject:  Re: Unable to run programs...+ a few other things
Did that, killed the vsec. Stuff still vanishes off the list, except all the bypassers, for some odd reason.
(Uplink Labs ACS)
I'm pretty sure someone said killing the ACS isn't the way to do it, so how are you supposed to add things to this system?
Author:  Mursu [Wed Jun 03, 2009 8:05 am ]
Post subject:  Re: Unable to run programs...+ a few other things
Quote:
Did that, killed the vsec. Stuff still vanishes off the list, except all the bypassers, for some odd reason.
(Uplink Labs ACS)
I'm pretty sure someone said killing the ACS isn't the way to do it, so how are you supposed to add things to this system?
1) Put the stuff you want in the list
2) Access the console
3) Type "help" (that should be quite obvious, no?)
4) Look for anything useful the help-command gives you, and act accordingly
5) ????
6) profit!

Plenty of tips have already been given in this thread. Shame on you if you still can't figure it out :-/
Author:  Hawk_v3 [Wed Jun 03, 2009 8:07 am ]
Post subject:  Re: Unable to run programs...+ a few other things
...New console commands? *fumes angrily*
Author:  AdamC [Wed Jun 03, 2009 2:43 pm ]
Post subject:  Re: Unable to run programs...+ a few other things
intresting respone i got from bugzila

>When you add programs to the acs server list when you disconnect some
> programs dissapear and if you keep on trying to add them they
> disappear the server has like 60gig free space all the time.

Not a bug. It's a security system inside the ACS. To get around it, you need to tweak something in the console, and to do that, you need to bypass the infamous VSEC 3.0
Author:  Switch [Sat Jun 06, 2009 4:40 pm ]
Post subject:  Re: Unable to run programs...+ a few other things
Anyone got any hints? My VSEC3 is bugging out and acting like a V2 so I can get in, I uploaded all my proggys and validated them but still no dice. Hints pretty plz.

Oh wait, some things are working. Some aren't. Yipes.

If this helps anyone, the first 40GQ AFTER the log_deleter that was on there originally (They had 7 programs equalling 22GQ) got deleted, and everything after that has stayed.
Page 2 of 2 All times are UTC-05:00
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/